5. A-level Textbook

This text book is an ongoing project. At the moment it as an amalgamation of all the written material I have. It is not therefore syllabus specific. Some material may be the same as what is on the revision guides but some has more extensive explanations. Over time I will add to the explanations to turn the revision guide bits into something more detailed. I will also add to the questions that appear in some chapters.

Physical Chemistry

Calculations

balancing equations

1.21 moles and formulae   Updated December 2019

1.22 concentrations and solutions  Updated December 2019

1.23 Gas Calculations   Updated December 2019

1.24 calculations and chemical reactions   Updated December 2019

1.25 titrations Updated November 2018

Atomic Structure

2.11 atomic structure and mass spectrometry New April 2018

2.12 electronic structure    Updated April 2018

2.13 ionisation energies Updated November 2018

Bonding

2.20 introduction to bonding Updated November 2018

2.21 ionic bonding   Updated November 2018

2.22 covalent bonding Updated November 2018

2.23 metallic bonding  Updated November 2018

2.24 shapes of molecules    Updated December 2019

2.25 intermediate bonding  Updated November 2018

2.26 intermolecular bonding Updated November 2018

2.27 structure of solid crystals  New April 2018

 

Energetics

3.11 introduction enthalpy change    New April 2015

3.12 Hesses law Updated March 2019

3.13 calorimetry Updated March 2019

3.14 bond enthalpies Updated March 2019

3.15 Born Haber Cycle Updated November 2018

3.16 Entropy and Gibbs Energy   Updated November 2018

3.17 Enthalpies of Solution   Updated November 2018

Kinetics

4.1 Reaction kinetics  Updated December 2019

Equilibria

4.2. equilibria Updated November 2018

Acid -base equilibria

4.30 acid bases and salts  Updated December 2019

4.35 acid base equilibria   New April 2018

 

Redox

4.40 redox  New April 2018

4.45 electrolysis New April 2018

Redox Equilibria

4.50 redox equilibria Updated November 2018

 Inorganic Chemistry

Periodicity

5.1. periodicity   Updated December 2019

Group 2

5.2. group 2 Updated November 2018

Group 7: The halogens

5.3. group 7  Updated December 2019

Metal Extraction

5.4. metal extraction New April 2018

Transition Metals

5.51 Introduction to transition metals  New April 2018

5.52 complex ionsUpdated February 2019

5.53 colour in complex ions  New April 2018

5.54 chemistry V Mn Cu Co Cr Ag Updated February 2019

5.55 Catalysis by transition metals   New April 2018

5.56 reactions of aqueous transition metal ionsUpdated February 2019

 Organic Chemistry

 

6.1. organic naming  Updated December 2019

6.1.5. isomerism Updated December 2019

6.2. alkanes Updated December 2019

6.3. alkenes   Updated November 2018

6.4. halogenoalkanes Updated November 2018

6.5. alcohols  Updated December 2019

6.12. polymers new April 2018

 

Reactions of the C=O bond

6.6. aldehydes and ketones  Updated December 2019

6.7. carboxylic acids and esters Updated November 2018

6.8. acyl chlorides and acid anhydrides  Updated November 2018

Benzene

6.9. benzene  Updated February 2019

6.95 Phenol  new April 2018

Amines, amino acids, polymers

6.10. Amines Updated November 2018

6.10.5 amides Updated December 2019

6.11. amino acids proteins and DNA Updated December 2019

6.12. polymers Updated February 2019

 Spectroscopy

6.13 analytical techniques Updated December 2019

Synthetic Routes

6.14 organic synthesis new April 2018

38 thoughts on “5. A-level Textbook

      1. NICoLISMITh

        thankssssssssss so much, i needed some help to work these calculations out, these notes are very concise and excellent thanks so much!!!!!!

  1. Pingback: Updates to A-level Textbook | chemrevise

  2. Pingback: Updates to A-level calculation guides | chemrevise

  3. Andrew Galea - Chemistry teacher

    Loads of hard work has gone into producing these notes – hope students appreciate the hard work of dedicated teachers – an inspiration to Chemistry students 🙂

    Reply
  4. student

    For ‘questions on errors’ in titrations, for part (d) surely there should be no effect on the calculated value of [NaOH] as the water doesn’t affect the number of moles of either reagent used and the moles of potassium hydrogenphthalate measured out by the pipette is the same?

    Reply
  5. chemnerd

    Great resources! However it would be superb if you have more questions for each topic and give answers to the questions.:)

    Reply
  6. Slurp

    Hey, thank you so much for notes. I was just wondering do you know where i can obtain the answers from as i am working through the questions from Unit 1, Module 1. Thanks again for your help.

    Reply
  7. Lynne

    It would be great if you could supply the answers to the mole questions in 1.21 and 1.24 (the new guides). Ive done them but not sure if I got them right and I would love to know. Thanks for your notes. Love them.

    Reply
      1. Lynne

        Got the answers – this will really help me – just in time for my amount of substance test on monday. thank you so much.

      2. Alisha

        Hi,

        I have looked at the answers but for some i am getting different answers to you, for example for 1.24 calculations and chemical reactions, question 1.1 your answer was 4.21g but i am getting 6.80g can you please explain how you are getting this?

      3. chemrevise Post author

        I would prefer you to show me how you get 6.80. Check you are using the atomic mass of Titanium (Ti). I suspect you might be doing it with thallium (Tl)

Leave a Reply to chemnerd Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.